How do I install and configure my FRITZ!Box 7530
 |
DSL | ||
| Port for connecting to DSL (ADSL2+/VDSL). This port will not be used if the FRITZ!Box is installed on a fiber connection. | |||
 |
FON | ||
| RJ11 socket for connecting analog telephones, fax machines and answering machines. | |||
 |
LAN 1 — LAN 4 | ||
| 4 gigabit Ethernet ports (10/100/1000 Base-T) for connecting computers, network hubs, game consoles and other network devices. | |||
 |
Power | ||
| Socket for connecting the power supply unit. | |||
|
Power/DSL | |||
| On | Device has electrical power and the DSL line is ready for operation | |||
| Flashing | Device has electrical power and the connection to DSL is being established or has been interrupted | |||
|
WLAN | |||
| On | Wireless LAN is enabled | |||
| Flashing | Switching wireless LAN function on or off | |||
|
Fon/DECT | |||
| On | Telephone connection via Internet or land-line network active | |||
|
Connect/WPS | |||
| Flashing | • Registration of a wireless via WPS in progress • Registration of a DECT device in progress |
|||
| Flashing rapidly | WPS aborted: more than two wireless devices are performing WPS at the same time | |||
 |
Info | |||
| Glows green | • Stick & Surf with FRITZ!WLAN USB stick is concluded • Adjustable |
|||
| Flashing green | • Updating FRITZ!OS • Stick & Surf with FRITZ!WLAN USB stick in progress • Time budget for online time has been reached • Adjustable |
|||
| Lights or flashes red | Error: • Open the FRITZ!Box user interface • Follow the instructions on the Overview page in the user interface |
→ Connect the power supply unit to the Power socket on your FRITZ!Box
→ Plug the other end into an AC power outlet
→ Insert the grey DSL cable into the DSL port on your FRITZ!Box
→ Insert the free end of the cable into the DSL or Line socket on the splitter or TF2007 phone socket
→ Insert the network cable into the LAN socket of the computer
→ Insert the free end of the cable into one of the LAN sockets on the FRITZ!Box
Step 1 — Opening the web interface |
|
 |
|
|
Open your web browser (Internet Explorer, Firefox,…) and go to the web interface of your FRITZ!Box. By default, it should be reachable on http://fritz.box or http://192.168.178.1. You will be redirected to the wizard for the first basic configuration. Select English or another language if preferred. Click on Next to continue. |
|
Step 2 — Logging in |
|
 |
|
|
The language of the web interface has now changed to the language of your choice. First of all, you need to enter the password of your FRITZ!Box. You can find it on the white sticker on the underside of the device. |
|
Step 3 — Regional setting |
|
 |
|
|
Next you will see the screen asking to choose the regional setting. Select Belgium in a drop-down menu and click on Apply. |
|
Step 4 — Selecting the annex |
|
 |
|
|
In order to make a successful connection to the edpnet network, your device needs to be put into the correct Annex setting, that depends on the type of your connection. Annex A: ADSL (PSTN or raw copper) Choose the corresponding Annex setting and click on Next. |
|
Step 5 — Reboot |
|
 |
|
|
The FRITZ!Box will now automatically reboot. It may take up to 2-3 minutes. |
|
Step 6 — Welcome to the FRITZ!Box |
|
 |
|
|
At this step, the FRITZ!Box will suggest to enable Diagnostics and maintenance option, which means that the device will be sending technical diagnostics data to AVM. Feel free to enable or disable the setting. |
|
Step 7 — Wizard |
|
 |
|
|
The next screen is the Welcome screen. Click on Next to start the wizard. If you purchased your FRITZ!Box not from edpnet, the automatic configuration is unfortunately not possible. In such a case, click on Cancel and proceed with manual configuration (see Step 11). Don't worry, it won't take more than a few minutes! |
|
Step 8 — Account Information |
|
 |
|
|
In the wizard, you need to choose your Internet Service Provider. Choose EDPnet in a drop-down list and select EDPnet DSL option. Click on Next. |
|
Step 9 — Confirm settings |
|
 |
|
|
If you have chosen EDPnet as your ISP, all the settings will be filled in automatically for your connection. Click on Next. |
|
Step 10 — Checking internet connection |
|
 |
|
|
Your device will now try to connect. |
|
Step 11 — Manual configuration |
|
 |
|
|
These steps can be followed if your internet connection is still not working after you followed the above-mentioned steps of automatic configuration. This part of the guide continues the steps of automatic configuration. Click on Internet in the main menu and then select Account Information in a drop-down list. Choose EDPnet in the drop-down list of Internet Service Provider. The only thing you have to fill in at this step is your connection credentials (username and password) which you received from edpnet. Then click on Apply. |
|
No worries! Configuring your FRITZ!Box is easy—even if you don’t have any laptop or PC. Just use your phone or tablet to access the modem web interface and set up internet connection.
Step 1 — Connecting to the modem
|
|
|
First you need to enable Wi-Fi on your FRITZ!Box. Press the WLAN button and hold it down until the WLAN LED starts flashing: Connect your phone or tablet to the wireless network you just enabled. It’s called FRITZ!Box 7530. The password by default is printed on a label you may find on the back of the modem: 
|
 |
Step 2 — Opening the web interface
|
|
|
Once you have connected to the modem wireless network, open your web browser (Internet Explorer, Firefox,…) and go to the web interface of your FRITZ!Box. By default, it should be reachable on http://fritz.box or http://192.168.178.1. You will be redirected to the wizard for the first basic configuration. Select English or another language if preferred. Click on Next to continue. |
 |
Step 3 — Logging in
|
|
|
The language of the web interface has now changed to the language of your choice: in our case to English. You will then need to enter the password of your FRITZ!Box. You can find it on the white sticker on the underside of the device:
Click Log in to continue. |
 |
Step 4 — Regional setting
|
|
|
Next you will see the screen asking to choose the regional setting. Select Belgium option in a drop-down list and click on Apply. |
 |
Step 5 — Selecting the annex
|
|
|
In order to make a successful connection to the edpnet network, your device needs to be put into the correct Annex setting, that depends on the type of your connection. Annex A: ADSL (PSTN or raw copper)
Annex B: VDSL
|
 |
Step 6 — Reboot
|
|
|
The FRITZ!Box will now automatically reboot. It may take up to 2-3 minutes.
|
 |
Step 7 — Welcome to the FRITZ!Box
|
|
|
At this step, the FRITZ!Box will suggest to enable Diagnostics and maintenance option, which means that the device will be sending technical diagnostics data to AVM. Feel free to enable or disable the setting. |
 |
Step 8 — Welcome screen
|
|
|
The next screen is the Welcome screen, where you can start the wizard to set up your internet connection. Click on Next. If you purchased your FRITZ!Box not from edpnet, the automatic configuration is unfortunately not possible. In such a case, click on Cancel and proceed with manual configuration (see Step 11). |
 |
Step 9 — Choosing your ISP
|
|
|
In the wizard, you need to choose your Internet Service Provider. Choose EDPnet in a drop-down list and select EDPnet DSL option. Click on Next. |
 |
Step 10 — Confirm the settings
|
|
|
If you have chosen EDPnet as your ISP, all the settings will be filled in automatically for your connection. Click on Next. |
 |
Step 10 — Checking connection
|
|
|
Your FRITZ!Box will now try to connect. If there is a green line, it means the configuration has been finished successfully. If there is a red line, check if your modem/router is still connected to the DSL line and if it gained synchronization (the Power LED should be on and not be blinking).
|
 |
Step 11 — Manual configuration
|
|
|
These steps can be followed if your internet connection is still not working after you followed the above-mentioned steps of automatic configuration. This part of the guide continues the steps of automatic configuration. Click on Internet in the main menu and then select Account Information in a drop-down list. |
 |
|
|
|
|
Choose EDPnet in a drop-down list under Internet Service Provider and select EDPnet DSL option. The only thing you have to fill in at this step is your connection credentials (username and password) which you received from edpnet. Click on Apply.
|
 |
